The demand for laser cutting Toronto has increased in the recent past. That is one of the reasons as to why the 4-Way Metal Fabricators has adopted the very latest technology of laser cutting to serve the demand of its clients in Toronto and wide. The laser cutting technology works when a high power laser is directed to an output that is guided wholly by a program programmed in the computer. This is usually done at the material that is to be cut by the laser technology the result is usually a very high surface finish of very high quality. This surface is usually left once the excesses of the metal being cut vaporize way laving the high quality finish.

With this laser technology the 4-Way Metal fabricators provide one of the most appealing laser cutting Toronto services to their clients in Toronto and wide. Laser cutting is done without fear or putting some metal at waste. This is very important bearing in mind that steel is very costly. It is therefore important to have very minimal loss of steel when it is being cut and that is why this very effective laser technology is adopted.

The laser technology is not only very precise technologically but also very powerful as far as the cutting of metal with laser is concerned. The 4-Way fabricators using the laser cutting Toronto are able to provide the following services:

Cut the steel 26ga using laser. It does so with steel that is up to "3/4" thickCut the stainless steel 26ga with laser. It cuts the stainless steel that is up to "5/8" thickCut the alum with laser. Alum that are between "0.2 up to 3/8" thick are cut by using this laser technology.

It is important to note that steel is not the only metal that the 4-Way Fabricators cut using the laser technology. Some other metals like satin coat, aluminized steel and galvanized steel just but to mention a few are some of the metals that are cut as well.